| Dump Height | 21.33 ft in
|
|---|
| Capacity - Heaped | 22.11 yd3
|
|---|
| Capacity - Struck | 17.14 yd3
|
|---|
| Rated Payload | 61949.9 lb
|
|---|
| Bore | 5.1 in
|
|---|
| Stroke | 6.2 in
|
|---|
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
|
|---|
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
|
|---|
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, i
|
|---|
| Lock To Lock | 4.75 seconds @ 60 rpm
|
|---|
| Def Tank* | 5.3 gal
|
|---|
| Front Axle - Empty | 33069 lb
|
|---|
| Center Axle - Empty | 10053 lb
|
|---|
| Rear Axle - Empty | 9568 lb
|
|---|
| Total Empty | 52690 lb
|
|---|
| Front Axle - Rated Load | 7231 lb
|
|---|
| Center Axle - Rated Load | 27249 lb
|
|---|
| Rear Axle - Rated Load | 27249 lb
|
|---|
| Total - Rated Load | 61729 lb
|
|---|
|
| Center Axle - Loaded | 37302 lb
|
|---|
| Rear Axle - Loaded | 36817 lb
|
|---|
| Total Loaded | 114420 lb
|
|---|
| Interior Cab | 72 dB(A)
|
|---|
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, wh
|
|---|
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
|
|---|
| Heaped (Sae 2:1) | 23 yd3
|
|---|
| Struck | 17.4 yd3
|
|---|
| Tailgate Struck | 18.2 yd3
|
|---|
| Tailgate Heaped Sae 2:1 | 24.6 yd3
|
|---|
| Raise Time | 12 s
|
|---|
| Scow | 0.6 in
|
|---|
| Side | 0.5 in
|
|---|
| Base | 0.6 in
|
|---|
| Front Plate | 0.3 in
|
|---|
| Base Plate | 0.6 in
|
|---|
| Side Plates | 0.5 in
|
|---|
| Body Plate Type | High strength Brinell HB450 wear resistant steel
|
|---|
| Note | An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators, and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having
|
|---|
| Wheel Loader: 962m - Passes | 45
|
|---|
| Wheel Loader: 950m - Passes | 5
|
|---|
