| Dump Height | 22.82 ft in
|
|---|
| Capacity - Heaped | 25.77 yd3
|
|---|
| Capacity - Struck | 19.23 yd3
|
|---|
| Rated Payload | 72091.16 lb
|
|---|
| Bore | 5.4 in
|
|---|
| Stroke | 6.8 in
|
|---|
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
|
|---|
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
|
|---|
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, i
|
|---|
| Lock To Lock | 4.75 seconds @ 60 rpm
|
|---|
| Def Tank* | 5.3 gal
|
|---|
| Front Axle - Empty | 41881 lb
|
|---|
| Center Axle - Empty | 14406 lb
|
|---|
| Rear Axle - Empty | 12919 lb
|
|---|
| Total Empty | 69206 lb
|
|---|
| Front Axle - Rated Load | 7417 lb
|
|---|
| Center Axle - Rated Load | 32337 lb
|
|---|
| Rear Axle - Rated Load | 32337 lb
|
|---|
| Total - Rated Load | 72091 lb
|
|---|
|
| Center Axle - Loaded | 46743 lb
|
|---|
| Rear Axle - Loaded | 45256 lb
|
|---|
| Total Loaded | 141297 lb
|
|---|
| Interior Cab | 79 dB(A)
|
|---|
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, wh
|
|---|
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
|
|---|
| Heaped (Sae 2:1) | 25.8 yd3
|
|---|
| Struck | 19 yd3
|
|---|
| Tailgate Struck | 19.9 yd3
|
|---|
| Tailgate Heaped Sae 2:1 | 27.3 yd3
|
|---|
| Heaped Sae 1:1 | 32 yd3
|
|---|
| Raise Time | 11 s
|
|---|
| Scow | 0.6 in
|
|---|
| Side | 0.5 in
|
|---|
| Base | 0.6 in
|
|---|
| Front Plate | 0.3 in
|
|---|
| Base Plate | 0.6 in
|
|---|
| Side Plates | 0.5 in
|
|---|
| Body Plate Type | High strength Brinell HB450 wear resistant steel
|
|---|
| Note | An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators, and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having
|
|---|
| Wheel Loader: 962m - Passes | 45
|
|---|
| Wheel Loader: 950m - Passes | 5
|
|---|
