| Weights |
| Counterweight | 551 lb
| | Operating Weight | 18519 lb
| | Operating Weight - With Cab | 18519 lb
|
|---|
|
| Boom / Stick / Bucket |
| Digging Force - Bucket | 13534 lb
| | Digging Force - Stick - Long | 7891 lb
| | Digging Force - Stick - Standard | 9015 lb
| | Maximum Bucket Capacity | 1.1 yd3
| | Minimum Bucket Capacity | 0.5 yd3
| | Stick Length - Long | 87 in
| | Stick Length - Standard | 66 in
| | Lift Height | 15 in
|
|---|
|
| Boom |
| Boom Swing Left | 60 degrees
| | Swing Speed | 11 rpm
|
|---|
|
| Blade |
| Blade Height | 17.8 in
| | Blade Width | 7.7 ft in
|
|---|
|
| Engine & Fuel System |
| Engine Make | 2236
| | Engine Model | Cat C3.3B
| | Engine Oil | 3 gal
| | Engine Oil Capacity | 3 gal
| | Fuel Capacity | 33 gal
| | Fuel Tank | 33 gal
| | Gross Power | 66.6 hp
| | Gross Power - Iso 14396 | 66.6 hp
| | Net Power | 65 hp
| | Net Power - Iso 9249 | 65 hp
| | Number Of Cylinders | 4
| | Power Measured @ | 2400 rpm
| | Aspiration | turbocharged
| | Emissions | Meets U.S. EPA Tier 4 Final and EU Stage IIIB emission standards.
| | Cooling System | 3.7 gal
| | Cooling System Fluid Capacity | 3.7 gal
| | Displacement | 203.2 cu in
|
|---|
|
| Drive System |
|
|
| Operating Specs |
| Dig Depth | 14.2 in
| | Maximum Dig Depth | 163.5 in
| | Operating Pressure - Equipment | 4061 psi
| | Operating Pressure - Swing | 3481 psi
| | Operating Pressure - Travel | 4061 psi
|
|---|
|
| Hydraulic System |
| Hydraulic System | 24.8 gal
| | Hydraulic Tank | 21.7 gal
| | Pump Flow At 2,000 Rpm | 39.6 gal/min
|
|---|
|
| Dimensions, Wheels & Tires |
| Width | 7.7 ft in
| | Height | 17.7 in
| | Track Gauge | 6.53 ft in
| | Ground Pressure | 5.26 psi
| | Gradeability - Maximum | 30 degrees
|
|---|
|
| Transmission |
| Max Travel Speed | 3.42 mph
| | Travel Speed - High | 3.2 mph
| | Travel Speed - Low | 1.8 mph
|
|---|
|
| Technical Specs |
| Machine Swing Speed | 11 rpm
| | Bore | 3.7 in
| | Stroke | 4.7 in
| | Note | Load sensing hydraulics with variable displacement piston pump.
| | Machine Overhang | 11 in
| | Note (1) | Each track is driven by one independent 2-speed motor.
| | Note (2) | Drive modules are integrated into the roller frame for total protection.
| | Note (3) | Straight line travel when tracking and operating the front linkage simultaneously.
|
|---|
|