Weights |
Operating Weight | 44418 lb
| Operating Weight - Lgp A | 50869 lb
| Operating Weight - Lgp S | 48588 lb
| Operating Weight - Lgp Vpat | 53178 lb
| Operating Weight - Xl A | 44795 lb
| Operating Weight - Xl Su | 45082 lb
| Operating Weight - Xl Vpat | 51041 lb
| Operating Weight - Xw A | 47576 lb
| Operating Weight - Xw Su | 46961 lb
| Operating Weight - Xw Vpat | 52031 lb
| Shipping Weight | 36974 lb
| Shipping Weight - Lgp A | 41471 lb
| Shipping Weight - Lgp S | 41471 lb
| Shipping Weight - Lgp Vpat | 40783 lb
| Shipping Weight - Std A | 35860 lb
| Shipping Weight - Std Su | 42834 lb
| Shipping Weight - Xl A | 37589 lb
| Shipping Weight - Xl Su | 37589 lb
| Shipping Weight - Xl Vpat | 38865 lb
| Shipping Weight - Xw A | 39174 lb
| Shipping Weight - Xw Su | 39174 lb
| Shipping Weight - Xw Vpat | 39591 lb
| Weight | 2600 lb
| Weight - Each Additional Shank | 163 lb
| Weight - With One Shank | 3606 lb
|
---|
|
Winch |
Drum Diameter | 10 in
| Drum Width | 13 in
| Winch And Bracket Length | 47.6 in
| Winch Case - Length | 47.6 in
| Winch Case - Width | 38.4 in
| Winch Model (1) | PA56 Optional Gearing
| Winch Model (2) | PA56
| Flange Diameter | 19.8 in
| Maximum Bare Drum - Line Pull | 89800 lb
| Rated Bare Drum Line Pull (1) | 70000 lb
| Rated Bare Drum Line Pull (2) | 59100 lb
| Drum Capacity - 22 Mm (0.88 In) | 290 ft in
| Drum Capacity - 25 Mm (1.0 In) | 220 ft in
| Drum Capacity - 29 Mm (1.13 In) | 220 ft in
|
---|
|
Ripper |
Ripper | 2799 psi
| Ripper Cylinder Flow | 49.9 gal/min
| Ripper Type | Fixed Parallelogram
| Beam Cross Section | 216 254 mm 8.5 10 in
| Overall Beam Width | 87 in
| Maximum Penetration | 19.7 in
| Maximum Penetration Force | 14557 lb
| Number Of Pockets | 3
|
---|
|
Blade |
|
Engine & Fuel System |
Engine Crankcase | 7.4 gal
| Engine Emissions | U.S. EPA Tier 3/EUStage IIIA/MLITStep 3
| Engine Model | Cat C9 ACERT
| Fuel Tank | 112 gal
| Gross Power | 228 hp
| Gross Power - Iso 14396 | 220 hp
| Gross Power - Sae J1995 | 228 hp
| Net Power - 80/1269/Eec | 200 hp
| Net Power - Caterpillar | 200 hp
| Net Power - Din 70020 | 207 PS
| Net Power - Eu 80/1269 | 200 hp
| Net Power - Iso 9249 | 200 hp
| Net Power - Sae J1349 | 198 hp
| Cooling System | 20.3 gal
| Displacement | 537 cu in
| Flywheel Power | 200 hp
|
---|
|
Drive System |
Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99
| Final Drive - Each | 3.6 gal
| Pressure Setting - Steering | 6048 psi
| Pump Output - Steering | 47.3 gal/min
|
---|
|
Hydraulic System |
Hydraulic Tank | 13.6 gal
| Angle Cylinder Flow - Vpat | 44.9 gal/min
| Lift Cylinder Flow | 49.9 gal/min
| Tilt Cylinder Flow | 21.1 gal/min
| Pump Output - Implement | 49.9 gal/min
|
---|
|
Dimensions, Wheels & Tires |
Length - Track On Ground | 113.1 in
| Ground Pressure | 9.36 psi
| Cab | Meets appropriate standards as listed below.
| Grouser Height | 2.6 in
| Rops/Fops | ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II
|
---|
|
Transmission |
Power Train | 38.5 gal
| 1.5 Forward | 2.4 mph
| 2.0 Forward | 3.2 mph
| 2.5 Forward | 4.1 mph
| 3.0 Forward | 5.3 mph
| 3.5 Forward | 7.2 mph
| 1.5 Reverse | 3 mph
| 2.0 Reverse | 4.1 mph
| 2.5 Reverse | 5.3 mph
| 3.0 Reverse | 6.8 mph
| 3.5 Reverse | 9.1 mph
|
---|
|
Technical Specs |
Pry-Out Force | 20137 lb
| Pivot Shaft Compartment | 1.3 gal
| Roller Frames - Each | 6.5 gal
| Oil Capacity | 17.8 gal
| Increased Tractor Length - Std | 20.4 in
| Increased Tractor Length - Lgp | 15.6 in
| Ferrule Size (O.D. Length) | 54 67 mm 2.10 2.63 in
| Optional Rope (25mm/1.0 In) | 163 ft in
| Oil Refill Capacity | 17.8 gal
| Bore | 4.4 in
| Stroke | 5.9 in
| Bulldozer - Angle | 3126 psi
| Bulldozer - Lift | 3126 psi
| Bulldozer - Tilt | 3126 psi
|
---|
|