| Weights |
|---|
| Operating Weight | 68600 lb
|
|---|
| Operating Weight - Lgp Wha | 68600 lb
|
|---|
| Shipping Weight - Lgp Wha | 58900 lb
|
|---|
| Weight | 3350 lb
|
|---|
| Weight - Each Additional Shank | 330 lb
|
|---|
| Weight - With One Shank | 3572 lb
|
|---|
|
| Boom / Stick / Bucket |
|---|
|
|
| Winch |
|---|
| Drum Diameter | 12.5 in
|
|---|
| Winch Drive | Hydraulic
|
|---|
| Winch Model | PA90
|
|---|
| Maximum Bare Drum - Line Pull | 90000 lb
|
|---|
| Maximum Bare Drum - Line Speed | 70 ft/min
|
|---|
| Maximum Full Drum - Line Pull | 57000 lb
|
|---|
| Maximum Full Drum - Line Speed | 116 ft/min
|
|---|
| Drum Capacity - 24 Mm (1 In) | 203 ft in
|
|---|
| Drum Capacity - 29 Mm (1.13 In) | 185 ft in
|
|---|
|
| Shanks |
|---|
| Shank Gauge | 70.9 in
|
|---|
| Shank Section | 72 mm 228 mm (2.8 in 9.0 in)
|
|---|
|
| Ripper |
|---|
| Ripper Cylinder Flow | 42 gal/min
|
|---|
| Ripper - Lift | 4000 psi
|
|---|
| Ripper - Pitch | 4000 psi
|
|---|
| Rippers Type | Multi-Shank
|
|---|
| Beam Cross Section | 14 in
|
|---|
| Overall Beam Width | 82.2 in
|
|---|
| Maximum Penetration | 25.6 in
|
|---|
| Maximum Penetration Force | 19639 lb
|
|---|
| Number Of Pockets | 3
|
|---|
| Pocket Spacing | 35.4 in
|
|---|
|
| Blade |
|---|
| Blade | 7S LGP
|
|---|
| Blade Capacity - Sae J1265 | 16.11 yd3
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Crankcase | 8 gal
|
|---|
| Engine Model | Cat C9.3 ACERT
|
|---|
| Fuel Tank | 108 gal
|
|---|
| Gross Power - Iso 14396 | 256 hp
|
|---|
| Gross Power - Iso 14396 (Din) | 260 hp
|
|---|
| Gross Power - Sae J1995 | 259 hp
|
|---|
| Net Power - Iso 9249 | 235 hp
|
|---|
| Net Power - Iso 9249 (Din) | 238 hp
|
|---|
| Net Power - Sae J1349 | 235 hp
|
|---|
| Global Emissions | U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
|
|---|
| Cooling System | 22.5 gal
|
|---|
| Displacement | 567 cu in
|
|---|
| Flywheel Power | 235 hp
|
|---|
|
| Drive System |
|---|
| Brakes | ISO 10265 2008
|
|---|
| Final Drive - Each - Lgp | 9 gal
|
|---|
| Pressure Setting - Steering | 4000 psi
|
|---|
| Pump Output - Steering | 82.4 gal/min
|
|---|
| Steering | 5950 psi
|
|---|
|
| Hydraulic System |
|---|
| Lift Cylinder Flow | 42 gal/min
|
|---|
| Pump Type | Piston, variable displacement
|
|---|
| Pump Output - Implement | 52.8 gal/min
|
|---|
|
| Dimensions, Wheels & Tires |
|---|
| Ground Clearance | 49.8 in
|
|---|
| Height | 4.41 ft in
|
|---|
| Cab | ANSI/SAE J1166 OCT 98
|
|---|
| Rops/Fops | ROPS meets criteria ISO 3471:1994, 2008 FOPS meets ISO 3449:1992, 2005 Level II
|
|---|
|
| Transmission |
|---|
| Drive Train Type | Electric Drive
|
|---|
| Power Train | 16 gal
|
|---|
|
| Technical Specs |
|---|
| Maximum Tilt | 30.9 in
|
|---|
| Note (1) | *Capacities calculated with a trash rack installed.
|
|---|
| Note (2) | **Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, and cylinder lines (Tilt).
|
|---|
| Width - Over End Bits | 14.91 ft in
|
|---|
| Bore | 4.5 in
|
|---|
| Stroke | 5.9 in
|
|---|
| Pivot Shaft Compartment | 1.8 gal
|
|---|
| Bulldozer | 4000 psi
|
|---|
| Tilt Cylinder | 4000 psi
|
|---|
| Pry-Out Force | 52695 lb
|
|---|
| Ramp Angle | 26 degrees
|
|---|
| Oil Capacity | 3.2 gal
|
|---|
| Increased Tractor Length - Lgp | 93.9 in
|
|---|
| Note | *Basic winch weight, mounting arrangement, hydraulic and electrical system weight.
|
|---|
|
