| Weights |
|---|
|
|
| Platform |
|---|
| Articulation Angle | 39 degrees
|
|---|
| Articulation Angle - Degrees | 39
|
|---|
|
| Boom / Stick / Bucket |
|---|
| Rated Bucket Capacity | 1.2 yd3
|
|---|
| Breakout Force - Bucket | 9442 lb ft
|
|---|
| Maximum Dump Height | 7.9 ft in
|
|---|
| Reach At Maximum Dump Height* | 2.7 ft in
|
|---|
| Bucket Capacities | 0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
|
|---|
| Bucket Capacities - Iso Coupler | 0.75-1.2 m3
|
|---|
|
| Mast |
|---|
| Fork Depth Above Ground | 1.8 in
|
|---|
| Fork Depth Below Ground | 1 in
|
|---|
| Fork Height At Maximum Reach | 4.91 ft in
|
|---|
| Fork Reach At Maximum Height | 1.7 ft in
|
|---|
| Maximum Fork Height | 10.4 ft in
|
|---|
| Overall Length - With Forks | 19.5 ft in
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Crankcase | 3 gal
|
|---|
| Engine Model | Cat C3.3B DIT*
|
|---|
| Engine Oil | 3 gal
|
|---|
| Fuel Tank | 13.7 gal
|
|---|
| Maximum Gross Power | 73 hp
|
|---|
| Maximum Gross Power - Iso 14396 | 73 hp
|
|---|
| Maximum Gross Power - Sae J1995 | 74 hp
|
|---|
| Maximum Net Torque - Sae J1349 | 189 lb ft
|
|---|
| Maximum Net Power - Iso 9249 | 69 hp
|
|---|
| Maximum Net Power - Sae J1349 | 68 hp
|
|---|
| Net Power | 74 hp
|
|---|
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
|
|---|
| Cooling System | 4.4 gal
|
|---|
| Displacement | 201 cu in
|
|---|
|
| Drive System |
|---|
| Adjustable Steering Column | Standard
|
|---|
| Fixed Steering Column | Standard
|
|---|
| Nominal Flow - Steering Pump | 12 gal/min
|
|---|
|
| Operating Specs |
|---|
|
|
| Hydraulic System |
|---|
| Hydraulic Cycle Time - Dump | 1.3 s
|
|---|
| Hydraulic Cycle Time - Lift | 5.2 s
|
|---|
| Hydraulic Cycle Time - Lower | 3.2 s
|
|---|
| Hydraulic Cycle Time - Rackback | 2.1 s
|
|---|
| Hydraulic System | 18.5 gal
|
|---|
| Hydraulic Tank | 12.2 gal
|
|---|
| Boost Flow Maximum Pressure | 3191 psi
|
|---|
| Main Relief - 3rd Aux Flow | 3400 psi
|
|---|
| Maximum Flow - Implement Pump | 19 gal/min
|
|---|
|
| Dimensions, Wheels & Tires |
|---|
| Tire Gauge | 4.7 ft in
|
|---|
| Tire Size | 405/70 R18
|
|---|
| Turning Radius - Inside Tire | 7.3 ft in
|
|---|
| Clearance - Level Bucket | 10 ft in
|
|---|
| Ground Clearance | 11.8 in
|
|---|
| Height - Ground Clearance | 1 ft in
|
|---|
| Turning Radius - Over Bucket | 14.6 ft in
|
|---|
| Overall Length - With Bucket* | 18.3 ft in
|
|---|
| Length - Wheel Base | 7.1 ft in
|
|---|
| Wheel Base | 7.1 ft in
|
|---|
| Rops | SAE J1040 MAY94, ISO 3471-1994
|
|---|
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
|
|---|
|
| Transmission |
|---|
| Transmission - Gear Box | 2.2 gal
|
|---|
| High Speed | 21.7 mph
|
|---|
| Speed 1 | 6.2 mph
|
|---|
| Speed 2 | 12.4 mph
|
|---|
| Forward - High Range | 22 mph
|
|---|
| Forward - Range 1 | 6 mph
|
|---|
| Forward - Range 2 | 12 mph
|
|---|
| Reverse - High Range | 22 mph
|
|---|
| Reverse - Range 1 | 6 mph
|
|---|
| Reverse - Range 2 | 12 mph
|
|---|
|
| Technical Specs |
|---|
| Cab Height | 8.1 ft in
|
|---|
| Departure Angle - Degrees | 33
|
|---|
| Hinge Pin At Maximum Height | 10.6 ft in
|
|---|
| Load Over Height | 9.9 ft in
|
|---|
| Maximum Reach | 4.2 ft in
|
|---|
| Reach At Ground Level | 2.5 ft in
|
|---|
| Width - Over Bucket* | 6.2 ft in
|
|---|
| Bore | 3.7 in
|
|---|
| Stroke | 4.7 in
|
|---|
| Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
|
|---|
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow h
|
|---|
| Option 1 | 335/80 R18 XZSL Michelin
|
|---|
| Option 2 | 340/80 R18 AT-R Firestone
|
|---|
| Option (3) | 340/80 R18 XMCL Michelin
|
|---|
| Option (4) | 340/80 R18 TRI2 Nokian
|
|---|
| Option (5) | 340/80 R18 Bibload Michelin
|
|---|
| Option (6) | 405/70 R18 SPT9 Dunlop*
|
|---|
| Option (7) | 12.5/80 R18 Flexport
|
|---|
| Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
|
|---|
| General Purpose | 1.2 yd
|
|---|
| Light Material | 1.6 yd3
|
|---|
| Full Turn Tipping Load | 7507 lb
|
|---|
| Bucket Width | 74 in
|
|---|
| Maximum Material Density | 3592 lb/yd
|
|---|
| Rated Capacity | 1 yd3
|
|---|
| Dump Height | 97 in
|
|---|
| Straight Tipping Load - Bucket | 9215 lb
|
|---|
| Rack Back - Transport Position | 52
|
|---|
| Vinyl Suspension Seat | Standard
|
|---|
| Air Conditioner | Optional
|
|---|
| Machine Security System | Optional
|
|---|
| Cat Radio/Cd/Mp3/Wma/Aux | Optional
|
|---|
| Adjustable Internal Mirror | Standard
|
|---|
| Rear Blind | Optional
|
|---|
| Heated Rear Window | Standard
|
|---|
| Coat Hook | Standard
|
|---|
| External Knock Back Mirrors | Standard
|
|---|
| Cup Holder | Standard
|
|---|
| Lockable Storage Box | Standard
|
|---|
| Sun Visor | Standard
|
|---|
| Two Access Doors | Standard
|
|---|
| Left Window - Sliding | Standard
|
|---|
| Cabin Light | Standard
|
|---|
| Heater | Standard
|
|---|
| Right Window - Sliding | Standard
|
|---|
| Height - Ground To Cab | 8.1 ft in
|
|---|
| Length - Overall | 18.5 ft in
|
|---|
| Reach - Bucket At 45 Degrees | 2.7 ft in
|
|---|
| Height - Bucket Pin | 10.6 ft in
|
|---|
| Width - Bucket | 6.2 ft in
|
|---|
| Width - Tread Center | 4.6 ft in
|
|---|
| Machine Width** | 6 ft in
|
|---|
| Dump Angle At Full Lift | 45 degrees
|
|---|
| Departure Angle | 33 degrees
|
|---|
| Note (1) | *Vary with bucket.
|
|---|
| Note (2) | **Vary with tire.
|
|---|
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
|
|---|
|
