| Weights |
|---|
|
|
| Platform |
|---|
| Lower Time | 2.7sec
|
|---|
| Articulation Angle | 40 degrees
|
|---|
|
| Boom / Stick / Bucket |
|---|
| Digging Depth | 3.8 in
|
|---|
| Bucket Capacities | 2.1 m3 – 5.0 m3 2.7 yd3 – 6.5 yd3
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Make | 2236
|
|---|
| Engine Model | C7.1 ACERT
|
|---|
| Fuel Capacity | 51.5 gal
|
|---|
| Fuel Tank | 51.5 gal
|
|---|
| Gross Power | 154 hp
|
|---|
| Max Torque | 580 lb ft
|
|---|
| Net Torque | 551 lb ft
|
|---|
| Net Power | 152 hp
|
|---|
| Rated Net Power | 154 hp
|
|---|
| Number Of Cylinders | 6
|
|---|
| Cooling System | 7.9 gal
|
|---|
| Cooling System Fluid Capacity | 8.5 gal
|
|---|
| Displacement | 402 cu in
|
|---|
|
| Drive System |
|---|
| Steering Angle - Each Direction | 40 degrees
|
|---|
| Steering Articulation | 40 degrees
|
|---|
| Steering Cylinder, Two, Bore | 2.8 in
|
|---|
|
| Hydraulic System |
|---|
| Hydraulic Cycle Time | 9.3 sec
|
|---|
| Hydraulic Tank | 23.8 gal
|
|---|
| Pump Flow Capacity | 50 gal/min
|
|---|
| Pump Flow - Implement Pump | 50 gal/min
|
|---|
| Relief Valve Setting | 3626 psi
|
|---|
|
| Dimensions, Wheels & Tires |
|---|
| Tire Size | 20.5
|
|---|
| Overall Length | 24.66 ft in
|
|---|
| Overall Height - Bucket Raised | 16.8 ft in
|
|---|
| Wheel Base | 9.81 ft in
|
|---|
| Front | 6.9 gal
|
|---|
| Rear | 6.6 gal
|
|---|
| Height - Top Of Rops/Fops | 10.9 ft in
|
|---|
| Rops | SAE J1040 MAY94, ISO 3471-1994
|
|---|
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
|
|---|
|
| Transmission |
|---|
| Transmission | 2.2 gal
|
|---|
| Transmission Fluid Capacity | 2.2 gal
|
|---|
| Max Speed - Forward | 25 mph
|
|---|
| Max Speed - Reverse | 25 mph
|
|---|
| Number Of Forward Gears | 4
|
|---|
| Number Of Reverse Gears | 4
|
|---|
| Forward - 1 | 8 mph
|
|---|
| Reverse - 1 | 8 mph
|
|---|
|
| Technical Specs |
|---|
| Carry Height | 1.5 ft in
|
|---|
| Dump Angle At Maximum Lift | 49 degrees
|
|---|
| Height - Center Of Axle | 2.21 ft in
|
|---|
| Length - Rear Axle To Bumper | 6.5 ft in
|
|---|
| Rack Back Angle - Carry | 45 degrees
|
|---|
| Rack Back Angle - Maximum Lift | 54 degrees
|
|---|
| Bore | 4 in
|
|---|
| Stroke | 5 in
|
|---|
| Eec 80/1269 | 156 hp
|
|---|
| Sae J1349 | 154 hp
|
|---|
| Iso 9249 (1997) | 156 hp
|
|---|
| Rear Axle/Diff Fluid Capacity | 6.9 gal
|
|---|
| Size | 20.5 R25 Radial (L-3)
|
|---|
| Raise Time | 5.7sec
|
|---|
| Dump Time | 1.7sec
|
|---|
| Static Tipping Load - Full Turn | 18444 lb
|
|---|
| Crankcase | 5.3 gal
|
|---|
| Maximum Working Pressure | 3626 psi
|
|---|
| Raise | 5.1 s
|
|---|
| Dump | 1.5 s
|
|---|
| Lower, Empty, Float Down | 2.7 s
|
|---|
| Total | 9.3 s
|
|---|
| Bore (1) | 4.7 in
|
|---|
| Stroke (1) | 28.7 in
|
|---|
| Bore (2) | 5.9 in
|
|---|
| Stroke (2) | 21.9 in
|
|---|
|
