| Weights |
|
|
| Boom / Stick / Bucket |
| Breakout Force | 38984 lb
| | Bucket Capacities | 3.20-7.40 m3 (4.19-9.68 yd3)
|
|---|
|
| Engine & Fuel System |
| Engine Model | Cat C9.3 ACERT
| | Fuel Tank | 82.7 gal
| | Maximum Net Torque - 1,200 Rpm | 1193 lb ft
| | Net Power - Iso 9249 | 298 hp
| | Emissions | Tier 4/Stage IV
| | Cooling System | 19 gal
| | Displacement | 568 cu in
|
|---|
|
| Drive System |
| Brakes | Brakes meet ISO 3450 standards
|
|---|
|
| Hydraulic System |
| Hydraulic Cycle Time - Total | 10.1 s
| | Hydraulic Tank | 33 gal
| | Implement Pump Type | Variable Displacement Piston
|
|---|
|
| Dimensions, Wheels & Tires |
| Maximum Width Over Tires | 9.83 ft in
| | Ground Clearance | 1.42 ft in
| | Wheel Base | 11.67 ft in
| | Front | Fixed
| | Rear | Oscillating ?13 degrees
| | Height - Top Of Rops | 11.75 ft in
| | Rops/Fops | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
|
|---|
|
| Transmission |
| Transmission | 15.9 gal
| | Forward - 1 | 4.1 mph
| | Forward - 2 | 7.7 mph
| | Forward - 3 | 13.5 mph
| | Forward - 4 | 24.4 mph
| | Reverse - 1 | 4.1 mph
| | Reverse - 2 | 7.7 mph
| | Reverse - 3 | 17.1 mph
|
|---|
|
| Technical Specs |
| Rack Back - Maximum Lift | 62 degrees
| | Tread Width | 7.33 ft in
| | Height - Top Of Exhaust Pipe | 11.58 ft in
| | Height - Top Of Hood | 9.25 ft in
| | Rack Back At Ground | 42 degrees
| | Hinge Pin Height At Carry | 2.08 ft in
| | Rack Back - Carry Height | 50 degrees
| | Crankcase | 6.5 gal
| | Def Tank* | 4.4 gal
| | Note (1) | The sound values are for specific operating conditions only.
| | Note (2) | Machine and operator sound levels will vary at different engine and/or cooling fan speeds.
| | Note (3) | Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.
| | Note (4) | Hearing protection may be needed when the doors and/or windows are open for extended periods or in a noisy environment.
| | Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
|
|---|
|