| Weights |
|---|
|
|
| Boom / Stick / Bucket |
|---|
| Breakout Force | 50357 lb
|
|---|
| Bucket Capacities | 4.2-12.2 m3 (5.25-16.0 yd3)
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Make | 2236
|
|---|
| Engine Model | Cat C13 ACERT
|
|---|
| Fuel Capacity | 112.5 gal
|
|---|
| Fuel Tank | 112.5 gal
|
|---|
| Gross Power | 417 hp
|
|---|
| Max Torque | 1617 lb ft
|
|---|
| Maximum Net Torque - 1,000 Rpm | 1505 lb ft
|
|---|
| Maximum Net Torque - 1,100 Rpm | 1515 lb ft
|
|---|
| Net Power | 378 hp
|
|---|
| Net Power - Iso 9249 | 386 hp
|
|---|
| Number Of Cylinders | 6
|
|---|
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.
|
|---|
| Cooling System | 14 gal
|
|---|
| Cooling System Fluid Capacity | 12 gal
|
|---|
| Displacement | 763 cu in
|
|---|
|
| Drive System |
|---|
| Brakes | Brakes meet ISO 3450:2011 standards
|
|---|
|
| Hydraulic System |
|---|
| Hydraulic Cycle Time - Total | 10.1 s
|
|---|
| Hydraulic Tank | 40 gal
|
|---|
| Pump Flow Capacity | 119 gal/min
|
|---|
| Implement Pump Type | Variable Displacement Piston
|
|---|
| Relief Valve Setting | 4975 psi
|
|---|
|
| Dimensions, Wheels & Tires |
|---|
| Maximum Width Over Tires | 10.83 ft in
|
|---|
| Wheelbase | 12.5 ft in
|
|---|
| Width Over Tires | 10.83 ft in
|
|---|
| Ground Clearance | 1.42 ft in
|
|---|
| Overall Length - Without Bucket | 26.17 ft in
|
|---|
| Height To Top Of Cab | 10.25 ft in
|
|---|
| Wheel Base | 12.5 ft in
|
|---|
| Front | Fixed
|
|---|
| Rear | Oscillating ?13 degrees
|
|---|
| Height - Top Of Rops | 12.58 ft in
|
|---|
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
|
|---|
|
| Transmission |
|---|
| Transmission | 20.3 gal
|
|---|
| Transmission Fluid Capacity | 20.3 gal
|
|---|
| Max Speed - Forward | 24.5 mph
|
|---|
| Max Speed - Reverse | 24.5 mph
|
|---|
| Number Of Forward Gears | 4
|
|---|
| Number Of Reverse Gears | 4
|
|---|
| Forward - 1 | 4.3 mph
|
|---|
| Forward - 2 | 8.3 mph
|
|---|
| Forward - 3 | 14.6 mph
|
|---|
| Forward - 4 | 24.5 mph
|
|---|
| Reverse - 1 | 4.8 mph
|
|---|
| Reverse - 2 | 9.4 mph
|
|---|
| Reverse - 3 | 16.7 mph
|
|---|
| Reverse - 4 | 24.5 mph
|
|---|
|
| Technical Specs |
|---|
| Length With Bucket On Ground | 26.17 ft in
|
|---|
| Tread Width | 8 ft in
|
|---|
| Height - Top Of Exhaust Pipe | 12.33 ft in
|
|---|
| Height - Top Of Hood | 10.25 ft in
|
|---|
| Rack Back - Carry Height | 48 degrees
|
|---|
| Hinge Pin Height At Carry | 2.08 ft in
|
|---|
| Rack Back - Maximum Lift | 61 degrees
|
|---|
| Rack Back At Ground | 40 degrees
|
|---|
| Rear Axle/Diff Fluid Capacity | 22 gal
|
|---|
| Crankcase | 9.8 gal
|
|---|
| Def Tank* | 5.5 gal
|
|---|
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
|
|---|
| Bucket Range | 4.2-12.2 m (5.25-16.0 yd)
|
|---|
| Bore | 5.2 in
|
|---|
| Stroke | 6.2 in
|
|---|
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when
|
|---|
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
|
|---|
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in sec
|
|---|
|
