| Weights |
|
|
| Platform |
|
|
| Boom / Stick / Bucket |
| Bucket Capacity Range – Sae | 3.6 – 5.2
| | Standard Bucket Capacity – Sae | 4.65
| | Breakout Force | 19600
|
|---|
|
| Boom |
| Boom | Raise, hold, lower, and float
| | Control Positions Boom | Raise, hold, lower, and float
|
|---|
|
| Engine & Fuel System |
| Engine Model | Komatsu SAA6D125E-5
| | Engine Oil | 10.1 gal
| | Engine Type | Water-cooled, 4-cycle
| | Fuel Tank | 109.2 gal
| | Fuel Type | Direct injection
| | Horsepower, Gross-Sae J1995 | 273.6 hp
| | Horsepower, Net-Iso 9249 | 272.3 hp
| | Horsepower, Net-Sae J1349 | 256.2 hp
| | Number Of Cylinders | 2
| | Rated Power | 2000
| | Aspiration | Turbocharged, aftercooled
| | Cooling System | 16.2 gal
| | Displacement | 673.8 cu in
| | Air Cleaner | Dry type with double elements and dust evacuator , plus dust indicator
| | Fan Drive Method | Hydraulic
|
|---|
|
| Drive System |
| Brake | Hydraulic, wet disc
| | Emergency Brake | Parking brake is commonly used
| | Parking Brake | Wet disc brake
| | Service Brake | Hydraulically actuated, wet disc brakes actuate on four wheels
| | Steering Angle | 35 degrees
| | Steering Pump Type | Piston Pump
| | Steering System Capacity | 51.6 gal/min
| | Steering System Type | Articulated type, full-hydraulic power steering
|
|---|
|
| Hydraulic System |
| Hydraulic Cylinders Type | Double-acting, piston type
| | Hydraulic Pump | Piston pump
| | Hydraulic System | 45.8 gal
| | Control Valve | 2-spool type
|
|---|
|
| Dimensions, Wheels & Tires |
| Wheelbase | 135.83 in
| | Ground Clearance | 1.73 ft in
| | Height To Top Of Cab | 11.49 ft in
| | Front | Fixed, semi-floating
| | Rear | Center-pin support, semi-floating, 26˚ total oscillation
|
|---|
|
| Transmission |
| Transmission Type | Full-powershif
| | Maximum Speeds Fwd | 22.5 mph
| | Maximum Speeds Rev | 23.2 mph
| | Number Of Speeds - Forward | 4
| | Number Of Speeds - Reverse | 4
|
|---|
|
| Technical Specs |
| Length | 8875 mm
| | Turning Circle | 50.14 ft in
| | Width Over Tyres | 118.51 in
| | Standard Fitment Size | 26.5 R25 L3
| | Lubrication Method | Gear pump ,Force Lubrication
| | Filter | Full-flow type
| | Governor | All speed, electronic
| | Ride Control System | Standard
| | Front Axle | 3661.5 cu in
| | Rear Axle | 14.8 gal
| | Bucket Description | GP Bucket, bolt on edge
| | Static Tipping Load,Full Turn | 36707 lb
| | Bucket Width | 10.5 ft in
| | Bucket Link Type | Z-Bar
| | Loader Control Type | Piston Pump
| | Bore | 2.8 in
| | Loader Control Capacity | 68.7 gal/min
| | Control Positions Bucket | Tilt-back, hold, and dump
| | Bucket | Tilt-back, hold, and dump
| | Stroke | 453 mm
| | Raise Time | 5.4sec
| | Dump Time | 1.6sec
| | Reduction Gear | Spiral bevel gear
| | Differential Gear | Conventional type
| | Final Reduction Gear | Planetary gear, single reduction
| | Drive System | Four-wheel drive
|
|---|
|