| Weights |
|---|
| Empty Weight | 232146.8 lb
|
|---|
| Gross Weight | 550004.9 lb
|
|---|
| Weight | 42108.3 lb
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Make | 2238
|
|---|
| Engine Model | SDA16 V159E-2
|
|---|
| Engine Oil | 13.5 gal
|
|---|
| Engine Type | Water-cooled, 4-cycle
|
|---|
| Fuel System | Direct injection
|
|---|
| Fuel Tank | 148 gal
|
|---|
| Max Torque | 697 kg•m 5,042 lb ft
|
|---|
| Torque Converter | 3-elements, 1-Stage, 2-phase
|
|---|
| Horse Power: Sae J1995 | 1500 hp
|
|---|
| Number Of Cylinders | 16
|
|---|
| Power Measured @ | 1900 rpm
|
|---|
| Aspiration | turbo-charged after-cooled
|
|---|
| Cooling System | 37.3 gal
|
|---|
| Displacement | 3066 cu in
|
|---|
| Air Cleaner | Dry type with double elements and precleaners, with dust indicator
|
|---|
| Lubrication System | Method- Gear pump, force-lubrication Filter-Full-flow type
|
|---|
|
| Drive System |
|---|
| Brake Surface | 59148 cm 2 24,668 in2
|
|---|
| Final Drive | Planetary gear
|
|---|
| Parking Brake | Spring applied, oil-released, 3 caliper dry disc mounted on input yoke to differential
|
|---|
| Secondary Brake | Manual – push button operated. Automatically applied prior to hydraulic system pressure dropping below established level.
|
|---|
| Service Brake | Front- Fully hydraulic control, oil-cooled multiple-disc type, Rear- Fully hydraulic control, oil-cooled multiple-disc type
|
|---|
|
| Hydraulic System |
|---|
|
|
| Dimensions, Wheels & Tires |
|---|
| Standard Tire | 33.00 R51
|
|---|
| Wheelbase | 17.72 ft in
|
|---|
| Width Over Tires-Front | 19.41 ft in
|
|---|
| Width Over Tires-Rear | 19.64 ft in
|
|---|
| Turning Radius | 40.03 ft in
|
|---|
| Overall Length | 37.31 ft in
|
|---|
| Overall Height | 19.2 ft in
|
|---|
| Rear | Full-floating
|
|---|
|
| Transmission |
|---|
| Transmission | Full-automatic, planetary shaft type
|
|---|
| Max Speed | 36 mph
|
|---|
| Speed Range | 7 speeds forward and 1 reverse
|
|---|
| Forward | Torque converter drive 1st and 2nd gear with direct drive lock-up in 1st through 7th
|
|---|
| Reverse | Torque converter drive
|
|---|
|
| Technical Specs |
|---|
| Capacity - Struck | 71 yd3
|
|---|
| Heaped (2:1, Sae) | 102 yd3
|
|---|
| Payload | 144.1 metric tons 158.9 u.s. tons
|
|---|
| Material | 400 Brinell hardness high tensile strength steel (front, sides, and bottom)
|
|---|
| Material Thickness-Bottom | 0.8 in
|
|---|
| Material Thickness-Front | 0.5 in
|
|---|
| Material Thickness-Sides | 0.4 in
|
|---|
| Target Area | 7670 mm x 5705 mm 25'2'x 18'9'
|
|---|
| Heating | Heating by exhaust gas
|
|---|
| Structure | Flat floor configuration
|
|---|
| Dumping Angle | 45 degrees
|
|---|
| Height At Full Dump | 37.6 ft in
|
|---|
| Governor | Electronic control
|
|---|
| Bore And Stroke | 159 mm x 159 mm 6.26' x 6.26'
|
|---|
| Fan Drive Type | Electronic controlled hydraulic
|
|---|
| Differentials | 20.7 gal
|
|---|
| Lockup Clutch | Wet, multiple-disc clutch
|
|---|
| Shift Control | Electronic shift control with automatic clutch modulation in all gears
|
|---|
| Differential | 2.647
|
|---|
| Planetary | 7.235
|
|---|
| Hoist Cylinder | Twin, 3-stage telescopic type
|
|---|
| Relief Pressure | 19.0 MPa 193.4 kg/cm 2 2,750 psi
|
|---|
| Hoist Time | Raise-15 sec, Lower-15 sec
|
|---|
| Retarder | Oil-cooled, multiple-disc front and rear brakes act as retarder.
|
|---|
|
